PowerPath in a Cluster Environment
Integrating/ Upgrading PowerPath Into an Existing AAM 5.1 (or later) Cluster
To integrate PowerPath into an existing AAM 5.1 (or later) cluster, follow these steps on each cluster node, one node at a time:
1.Stop cluster services on the node using either the ft_shutdown command or the Management Console.
2.Install or upgrade PowerPath on the node. Refer to Chapter 1, Installing PowerPath.
3.Start cluster services on the node using either the ft_startup command or the Management Console, and wait for the node to be fully reintegrated into the cluster.
PowerPath in a Legato 5.1 (or later) AAM Cluster | |
|
|
2
