Shindaiwa 81704 manual Properly Equipped Operator, Always use the proper cutting tool for the job

Safety Instructions

WARNING!

Use Good Judgment

ALWAYS wear eye protection to shield against thrown objects.

NEVER run the engine when trans- porting the unit.

NEVER run the engine indoors! Make sure there is always good ventilation. Fumes from engine exhaust can cause serious injury or death.

ALWAYS clear your work area of trash or hidden debris that could be thrown back at you or toward a bystander.

ALWAYS use the proper cutting tool for the job.

ALWAYS stop the engine immediately if it suddenly begins to vibrate or shake. Inspect for broken, missing or improp- erly installed parts or attachments.

NEVER extend trimming line beyond the length specified for your unit.

ALWAYS keep the unit as clean as practical. Keep it free of loose vegeta- tion, mud, etc.

ALWAYS hold the unit firmly with both hands when cutting or trimming, and maintain control at all times.

ALWAYS keep the handles clean.

ALWAYS disconnect the spark plug wire before performing any mainte- nance work.

ALWAYS, if a saw blade should bind fast in a cut, shut off the engine imme- diately. Push the branch or tree to ease the bind and free the blade.

The Properly Equipped Operator

	Wear hearing protection devices
Wear close-fitting clothing to protect	and a broad-brimmed hat or hel-
	met.
legs and arms. Gloves offer added
protection and are strongly recom-	Always wear eye protection such as
mended. Do not wear clothing or
	goggles or safety glasses.
jewelry that could get caught in
machinery
or underbrush.
Secure hair so it is
above shoulder
level. NEVER
wear shorts!
	Always operate with both hands
	firmly gripping the unit.

Always make sure the

appropriate cutting attachment shield is correctly installed and in good condition.

Keep away from the rotating trimmer line or blade at all times, and never lift a moving attachment above

Keep a proper footing andwaist-high. do not overreach—main-

tain your balance at all times during operation.

Wear appropriate footwear (non-skid boots or shoes): do not wear open-toed shoes or san-

dals. Never operate the unit while barefoot!

Always wear a shoulder strap or a harness when operating

a unit equipped with a blade.

Figure 1