STEP 10 (See Diagram 10 & Cable Loop Diagram)
A.) Hook one end of the 98” Butterfly Cable (#57) to Right Butterfly (#10). B.) Draw the Cable towards the right open Swivel Pulley Bracket (#17).
C.) Attach a Pulley (#40) to the bracket. Secure it with one M10 x 1 ¾” Allen Bolt (#74), two ∅ ¾” Washers (#91), and one M10 Aircraft Nut (#97).
D.) Draw the Cable over the Pulley then pull downward. Attach the Cable to an Angled Floating Pulley Bracket (#16). Repeat Procedure C to install a Pulley. Let the Bracket hanging for now.
E.) Draw the Cable around the Pulley and pull upward to the left open Swivel Pulley Bracket (#17). Repeat C to install a Pulley.
F.) Draw the Cable over the Pulley and hook the end to the Left Butterfly (#9).
DIAGRAM 10
21
