ASSEMBLY INSTRUCTION
Tools Required for Assembling the Machine: Two Adjustable Wrenches and
Allen Wrenches. NOTE: It is strongly recommended that this machine to be assembled by two or more people to avoid possible injury.
STEP 1 (See Diagram 1)
A.) Place the Middle Stabilizer (#2) on flat surface.
B.) Attach the Base Frame (#3) to the front of Middle Stabilizer. Attach the Rear Stabilizer (#20) to the Middle Stabilizer from rear.
C.) Align the holes. Secure them together with two M10 x 4” Carriage Bolts (#71), two Ø ¾” Washers (#91), and two M10 Aircraft Nuts (#97).
DIAGRAM 1
7
