Important: when mounting the grill burner check that there is a space of at least 4 mm between the security thermocouple (if installed) and the burner.
m |
4 m |
Important
On completion of the operation, replace the old rating sticker with one indicating the new type of gas used. This sticker is available from our Service Centres.
Note
Should the pressure of the gas used be different (or vary) from the recommended pressure, it is necessary to fit a suitable pressure regulator onto the inlet pipe in compliance with current National Regulations relative to “regulators for channelled gas”.
Raised border assembly (only on a few models)
To assemble the raised border correctly, please follow the instructions below:
·Unscrew the 4 screws and the 2 spacers on the rear part of the worktop;
·Place the raised border on the rear part of the worktop;
·Screw the raised border onto the worktop using the four screws you previously removed, ensuring that you reposition the spacers on the outermost screws.
7