SECTION 5: MAJOR COMPONENTS
The figures in this section provide a general overview of component placement in a
Optional reflector configurations are shown on Page 4, Figure 1 through Page 6, Figure 9. Install appropriate suspension hardware, beam clamps, chain or rod at predetermined locations. Adjustments of chain length will provide uniform pitch.
FIGURE 10: Major Component Descriptions
Burner | Tube |
| Hot rolled, heat treated or |
| coated aluminized tube |
| supplied in 10' (3 m) lengths. |
Reflector |
| Reflector with Hole |
(Aluminum or |
| |
| (Aluminum or | |
Stainless Steel) |
| |
| Stainless Steel) | |
Alternate overlap as |
| |
| Alternate overlap as | |
shown on overview. |
| |
| shown on overview. | |
Minimum overlap is 6" |
| |
| Minimum overlap is 6" | |
(16 cm). |
| |
| (16 cm). | |
|
| |
Flex Gas Line | 45° Elbow | 90° Elbow |
with |
|
|
Cross
Combustion Chamber | Tee |
Coupling Assembly | Tube Adapter | End Vent |
|
| |
with Lock |
|
|
8