Step 8.6.3 Reflector Side Extension Installation for Decorative Grilles
NOTE: If the decorative grille system is to be installed in an area with |
|
considerable air movement, it is recommended that one |
|
#8 x 3/8" sheet metal screw be installed per reflector extension to | 6" (15 cm) Minimum |
prevent it from blowing over. |
Allow 6" (15 cm) minimum clearance between burner box and overhead obstructions for service.
Insert screw |
here (see note). |
A
Description | Part Number |
Reflector Side Extension | 01370412 |
|
|
Reflector Side Extension
Distance "A" | Extension | ||
Minimum | Maximum | Part No. | Width |
|
|
|
|
2" (4 cm) | 6" (15 cm) | 01370408 | 8" (20 cm) |
6" (15 cm) | 10" (26 cm) | 01370412 | 12" (30 cm) |
|
|
|
|
10" (26 cm) | 14" (37 cm) | 01370416 | 16" (40 cm) |
|
|
|
|
8.7
In order to maintain reflector shape, do not fasten brackets together.
#8 Sheet Metal Screws Do not fasten bracket to adjoining reflectors. Maintain same slipjoint position as reflectors.
Decorative Grille Bracket
Description | Part Number |
Bracket | 01363003 |
|
|
Cut relief notches for supports and hangers.
2" (5 cm) Minimum Bracket Overlap
26
