SECTION 7: HEATER INSTALLATION

Step 7.4.3 Reflector, U-Clip and Reflector Support Installation

The pictorial drawings of the heater construction in Section 7 are schematic only and provide a general guideline of where hangers, reflector supports and U-clips are to be installed.

To ensure proper expansion and contraction movement of the reflectors, a combination of U-clips and reflector supports are used. The positioning of

reflector supports and U-clips depend on the individual installation. Use either pop rivets or sheet metal screws instead of u-clips when installing end caps and joint pieces in areas where impact and high wind may be a factor. The following rules must be observed.

1.The first reflector after the burner must be affixed in the middle of the reflector with a reflector support and tight screws.

End

First Reflector

U-Clips

Overlap must be a

6"

minimum of 6" (16 cm)

(16 cm)

2.The overlap at the first and second reflector is a slip overlap. Thereafter, every third reflector joint is a slip overlap. A slip overlap is achieved by either:

a.) both reflectors lay inside a hanger. (No reflector support needed).

b.) using a reflector support with loose screws at the reflector overlap.

Tight

Sheet Metal

Screw

Wire Form

Reflector Support

Strap

2 B

Slip Overlap Reflector

Reflector

Support

Loose screws loosened 1/16" (1.6 mm)

to allow slippage.

2 A

Slip Overlap

3.The remaining reflector overlaps require a non-slip overlap connection. To affix the reflectors together in a non-slip overlap either:

a.) use reflector support and tight screws.

b.) if both reflectors lay inside a hanger, u-clips or sheet metal screws may be used.

This section of three reflectors joined together must be affixed to the tube with at least one reflector support with tight screws.

3 A

Non-Slip Overlap

3 B

Non-Slip Overlap

Reflector

Tight

Screws

Description

Part Number

Reflector Support Package

03050010

Wire Form

91908004

Reflector Support Strap

03050000

Screw #8 x 3/4

94320812

U-Clip Package

91107720

Reflector End Cap

027508XX

U-Clip

(2 Clips per

Non-slip Overlap

inside a Hanger)

19

Page 25
Image 25
Roberts Gorden CRV-B-9, CRV-B-8, CRV-B-12A, CRV-B-6, CRV-B-10, CRV-B-2, CRV-B-4 Screw Wire Form Reflector Support Strap

CRV-B-4, CRV-B-12, CRV-B-2, CRV-B-10, CRV-B-6 specifications

The Roberts Gordon CRV-B-9 is a state-of-the-art infrared radiant heater designed for industrial and commercial heating applications. Renowned for its efficiency and effectiveness, the CRV-B-9 represents a significant advancement in the world of space heating solutions.

One of the main features of the CRV-B-9 is its advanced infrared technology, which allows for precise heating without the necessity of warming the entire space. This targeted heating provides immediate comfort, as it directly warms objects and people rather than the air around them, making it particularly effective in large warehouses, manufacturing facilities, and retail spaces.

The heater boasts an impressive output of up to 80,000 BTUs, making it suitable for a wide range of applications. It utilizes natural gas as fuel, which contributes to its efficiency and cost-effectiveness. With a robust design and durable construction, the CRV-B-9 is built to withstand the rigors of industrial environments while ensuring a long product lifespan.

Another significant characteristic of the CRV-B-9 is its ability to integrate with advanced control systems. This includes compatibility with programmable thermostats and energy management systems, allowing for optimized temperature control and reduced energy consumption. The heater can be adjusted to suit different operational needs, making it a flexible solution for various heating scenarios.

The CRV-B-9 also features a compact design, allowing for easy installation in a variety of spaces. Its low-profile shape and modular capability enable users to arrange multiple units to achieve the desired heating coverage without compromising floor space, a crucial aspect for busy, high-traffic areas.

Safety is a priority with the CRV-B-9, which is equipped with various safety features such as a flame safety cutoff switch and over-temperature protection. These mechanisms ensure safe operation, providing peace of mind for users in demanding environments.

In summary, the Roberts Gordon CRV-B-9 infrared radiant heater stands out for its innovative technology, impressive output, energy efficiency, and safety features. Its flexibility and robust design make it an ideal choice for businesses looking to enhance comfort while minimizing energy costs. Whether in a manufacturing plant or a retail outlet, the CRV-B-9 provides a reliable and effective heating solution.