STEP 6 (See Diagram 6)

A.) Attach the Left Dip Support (#28) into Right Dip Support (#27) behind the Power Station Vertical Frame (#26).

B.) Attach the holes on the bracket of Left & Right Dip Support to the hole on the Vertical Frame. Align the holes. Secure the Left & Right Dip Support, and the Vertical Frame together with one M10 x 4 7/8” Hex Bolt (#86), one Ø 1” Washers (#92), one Ø ¾” Washer (#91), and one M10 Aircraft Nut (#97). Do not over tighten the Nuts and Bolts. Make sure the Left and Right Dip Support are able to move up freely.

C.) Secure the Left & Right Dip Support together with two M10 x 2 ½” Allen Bolts (#76), two Ø ¾” x 1 1/8” Curved Washers (#95), and two M10 Aircraft Nuts (#97).

D.) When doing Chin-up exercise, fold up the Left & Right Dip Support. Insert the 4” Power Station Lock Pin (#62) through the holes on Right Dip Support into the open slot on the back of Power Station Vertical Frame to hold up both Dip Supports in position.

15

Page 16
Image 16
Impex MWM-1840 manual See Diagram