10/15-Hour Maintenance

 

 

 

 

 

 

 

Clean the spark plug

0.024–0.028 inch

 

 

and check the gap at

 

 

 

 

the electrode.

(0.6–0.7 mm)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Figure 29

Every 10 to 15 hours of operation:

nRemove and clean the spark plug. Adjust the spark plug electrode gap to 0.024

0.028 inch (0.6-0.7 mm). If the spark plug must be replaced, use only an NGK CMR5H or equivalent resistor type spark plug of the correct heat range. See Figure 29.

NOTE:

The NGK CMR5H also meets the requirements for electro magnetic compliance (EMC).

CAUTION!

Before removing the spark plug, clean the area around the plug to prevent dirt and debris from getting into the engine’s internal parts.

50-Hour Maintenance

Every 50 hours of operation

(more frequently in dusty or dirty conditions):

nRemove and clean the cylinder cover and clean grass and dirt from the cylinder fins.

nRemove the cutting attachment, cutting attachment holder and gear shaft collar. Remove the filler plug from the side of the gear case and press new grease into the gear case until old grease is pushed out. Use only lithium-base grease such as Shindaiwa Gear Case Lubricant or equivalent. See Figure 30.

nLubricate main shaft splines.

nUse a hooked wire to extract the fuel filter from inside the fuel tank.

See Figure 31.

CAUTION!

Make sure you do not pierce the fuel line with the end of the hooked wire. The line is delicate and can be damaged easily.

Remove and replace the filter element.

Before reinstalling the new filter element, inspect the condition of all the fuel system components (fuel pick-up line, fuel return line, tank vent line, tank vent, fuel cap and fuel tank). If damage, splitting or deterioration is noted, the unit should be removed from service until it can be inspected or repaired by a Shindaiwa- trained service technician.

New

Grease

Old

Grease

Gear Shaft

Collar

Figure 30

Hooked

Wire

Filter Element

Figure 31

14

Page 14
Image 14
Shindaiwa 82014, T2510X manual 10/15-Hour Maintenance, Remove and replace the filter element

T2510X, 82014 specifications

The Shindaiwa 82014 and T2510X are notable products in the landscape of outdoor power equipment, emblematic of Shindaiwa's commitment to quality and performance. Designed to meet the rigorous demands of professional landscapers and gardeners, these models boast a combination of advanced technology, user-friendly features, and exceptional reliability.

The Shindaiwa 82014 is a powerful, two-stroke, backpack blower. It features a robust engine that delivers an impressive air volume and velocity, making it ideal for clearing leaves, debris, and other materials from large areas quickly and efficiently. The blower’s lightweight design and ergonomic harness distribute weight evenly, reducing fatigue during extended use. Additionally, the 82014 is equipped with an innovative starting system that makes it easy to start with minimal effort, ensuring that users can get to work quickly without the hassle of cumbersome pull cords.

This model also showcases a low-noise engine, making it compliant with stringent noise regulations, which is especially beneficial for urban landscaping tasks. The engine's efficient fuel consumption enhances runtimes, thereby increasing productivity on the job. The powerful airflow can be adjusted with a simple throttle control, providing versatility for various tasks, whether it’s gentle blowing for flower beds or strong gusts for heavy debris.

On the other hand, the T2510X is a high-performance trimmer, known for its smart design and functionality. This model features a professional-grade, 25.4cc engine that ensures robust power while maintaining low emissions and fuel consumption. The T2510X incorporates a rapid load trimmer head, allowing users to reload line quickly without any tools, thus minimizing downtime and enhancing operational efficiency.

The adjustable handle on the T2510X provides comfort and control, allowing users to tackle any trimming task while maintaining a firm and comfortable grip. Furthermore, the machine is equipped with an anti-vibration system, which helps to reduce operator fatigue and improves overall comfort during prolonged usage.

Both models underscore Shindaiwa’s dedication to delivering equipment that not only meets but exceeds the expectations of professionals in the landscaping industry. With cutting-edge features, a focus on operator comfort, and powerful performance, the Shindaiwa 82014 and T2510X are indispensable tools for anyone looking to achieve optimal results in landscape maintenance and management.