Shindaiwa HT254 General Safety Instructions, Work Safely, Stay Alert, Minimize the Risk of Fire

Models: X7502864200 HT254EF HT254

1 28
Download 28 pages 46.79 Kb
Page 3
Image 3
General Safety Instructions

General Safety Instructions

Work Safely

Shindaiwa hedge trimmers operate at very high speeds and can do serious

WORK SAFELY!

damage or injury if they are misused or abused. Never allow a person without training or instruction to operate your unit!

Work Safely WARNING!

Never make unauthorized attach- ment installations.

Stay Alert

You must be physically and mentally fit to operate this unit safely.

D

I

WARNING! WORK SAFELY!Stay Alert UA

M

Never operate power

equipment of any kind if you are tired or if you are under the influence of al- cohol, drugs, medication or any other substance that could affect your abil- ity or judgement.

WARNING!

Minimize the Risk of Fire!

ALWAYS check unit for fuel leaks before use. Check for leaks around fuel tank cap while refueling. If fuel leaks are found immediately stop using the unit. Fuel leaks must be repaired before using unit.

ALWAYS move the unit to a place well away from a fuel storage area or other readily flammable materials before starting the engine.

Always wear close-fitting clothing. Gloves offer added protection and are strongly recommended. Do not wear clothing or jewelry that could get caught in machinery.

Always wear eye, ear, and hand protection while operating this unit!

Always stop the engine before removing branches or debris from the cutters! Never allow the cutters to contact buildings or other hard objects!

Always stop the engine and install the blade cover before moving to another work site, and maintain a firm footing while operating or carrying the trimmer.

Never cut metal objects or wire with the blade.

Use extreme caution when operating near fences or electric wiring.

Figure 1

Never allow children to use the unit. Avoid operating near bystanders.

Always grip support handle with right hand and throttle handle with left hand..

Never operate this unit if the safety guard has been removed or damaged!

Avoid using or storing this unit in a wet environment. Water on the cutters may enter the gearcase and damage your unit.

Avoid cutting large or extremely “woody” branches. Doing so can shorten cutter life, and may also damage the gearcase.

Always keep proper footing and do not overreach. Maintain your balance at all times during operation.

3

Page 3
Image 3
Shindaiwa HT254EF, X7502864200 manual General Safety Instructions, Work Safely, Stay Alert, Minimize the Risk of Fire