Shindaiwa X7502864200, HT254 Safety Equipment and Labels, Specifications, Electrode Gap, Torque

Safety Equipment and Labels

ON-OFF

Switch

Throttle Interlock

Blade Cover

Warning Label

Protector

CAUTION
	READ AND	WEAR EYE	THE BLADES	KEEPS HANDS
FOLLOW THE		AND HEARING	ARE SHARP!	CLEAR OF
INSTRUCTIONS PROTECTION			HANDLE WITH	CUTTER
IN THE		AT ALL TIMES	CARE.	BLADES WHEN
OPERATORS		DURING		STARING THE
MANUAL.		OPERATION.		ENGINE.

Caution Label

IMPORTANT!

	Caution, Danger, Warning, and Operation Information Labels:
	Make sure all information labels are undamaged and readable.
Figure 2	Immediately replace damaged or missing information labels. New
	labels are available from your local authorized Shindaiwa dealer.

Specifications

Model	HT254-30	HT254-40
Engine Type	4-cycle, horizontal cylinder, air cooled
Engine Bore x Stroke	34mm x 27mm (1.34 x 1.06 in)
Engine Displacement	24.5cc (1.5 in3)
Unit Weight, Less Fuel	5.8 kg (12.8 lb)	6.2 kg (13.7 lb)
Unit Dimensions (LxWxH)	1095 x 245 x 230 mm (43.11 x 9.65 x 9.06 in)	1410 x 245 x 230 mm (55.51 x 9.65 x 9.06 in)
Fuel Tank Capacity	0.55 liter/ 18.6 oz.
Fuel/oil ratio	50:1 with *ISO-L-EGD or JASO FD class engine Oil
Carburetor	Diaphragm type
Ignition	Electronic
Spark Plug	NGK CMR5H
Electrode Gap	0.6 mm/ .024	in.
Torque	16.7 - 18.6 N∙m / 148-165 in • lbf
Air Cleaner	Foam pre-fiilter; main fiilter: dry element
Muffler Type	Spark arrestor muffler or spark arrestor muffler with catalyst
Starting Method	Recoil type
Stopping Method	Slide switch,grounding type
Blade Length	740 mm (29.13 in)	1055 mm (41.54 in)
Blade Type	Double-blade cutting action: double-edged blade
Clutch Type	Centrifugal clutch, dry-type
Gear Type	Spur gears
Gear Lubrication	Lithium-based grease
Standard Equipment	Rear handle with integral controls, anti-vibe mountings, front handle with guard, tool kit, and blade
	cover
Engine Speed	3,000 RPM
Clutch Engagement Speed	4,100 RPM
Wide Open Throttle Speed (W.O.T.)	10,500 RPM

Specifications are subject to change without notice.

IMPORTANT

This spark ignition system complies with the Canadian standard ICES-002.

5