Shindaiwa HT254EF manual Emission Control Exhaust & Evaporative, Unit Description, Prior to use

Emission Control (Exhaust & Evaporative)

EPA 2010 and Later and/or C.A.R.B. TIER III

The emission control system for the engine is EM/TWC (Engine Modification and 3-way Catalyst) and for the fuel tank the Control System is EVAP (Evaporative Emissions) or N (for nylon tank). Evaporative emis- sion may be applicable to California models only.

An Emission Control Label is located on the unit. (This is an EXAMPLE ONLY; information on label varies by en- gine FAMILY).

PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)

The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual.

Unit Description

Familiarize yourself with your machine and its various components. Understanding your machine helps ensure top performance, long service life, and safer operation.

Prior to use

Before using this product, please make sure you have all the components required for a complete unit:

■■Unit assembly

■■Kit with this manual and tool kit for routine maintenance. ■■Cutter blade cover

Carefully inspect all components for damage.

IMPORTANT!

The terms “left,” “left-hand,” and “LH”; “right,” “right-hand,” and “RH” ; “front” and “rear” refer to directions as viewed by the operator during normal operation of this product.

WARNING!

Do not make unauthorized modifications or alterations to this machine or any of its components or accessories.

6

		Guide Bar Support Handle	Recoil
		Cutter	Starter
	Fuel Cap	Blade
		Cover
Fuel Tank
		Protector
		Muffler	Throttle Handle
		Throttle Trigger
		Choke
ON-OFF		Air Cleaner
Switch
		Cover
Figure 3		Gearcase