PURCHASED REPAIR PARTS AND ACCESSORIES

• 90-day all applications

ATTENTION ENGINE POWERED PRODUCT OWNERS

This Shindaiwa engine powered product is a quality-engineered unit which has been manufactured to exact tolerances to provide superior performance. To help ensure the performance of the unit, it is required to use engine oil which meets the ISO-L-EGD Standard per ISO/CD 13738 and JASO M345/FD Standards. Shindaiwa Red ArmorTM and Shindaiwa OneTM are a premium engine oil specifically formulated to meet ISO-L-EGD (ISO/CD 13738) and JASO M345/FD Standards. The use of engine oils designed for other applications, such as for outboard motors or lawnmowers can result in severe engine damage, and will void your engine limited warranty.

THIS WARRANTY DOES NOT COVER DAMAGE CAUSED BY:

•Lack of lubrication or engine failure, due to the use of engine oils that do not meet the ISO-L-EGD (ISO/CD 13738) and JASO M345/FD Standards. Shindaiwa Red ArmorTM and Shindaiwa OneTM Engine Oil meets the ISO-L-EGD and JASO M345/FD Standard. Emission related parts are covered for 2 years regardless of engine oil used, per the statement listed in the EPA or California Emission Control Warranty Explanation.

•Damage caused by use of gasohol, containing methanol (wood alcohol), or gasoline containing less than 89 octane. Only use gasoline which contains 89 octane or higher. Gasohol which contains a maximum 10% ethanol (grain alcohol) or 15% MTBE

(methyl/tertiary/butyl/ether) is also approved. The prescribed mixing ratio of gasoline to oil is listed on the Shindaiwa oil label and covered in your operator’s manual.

•Engine damage caused by use of ether or any starting fluids.

•Damage caused by tampering with engine speed governor or emission components, or running engines above specified and recommended engine speeds as listed in your operator’s manual.

•Operation of the unit with improperly maintained/removed cutting shield or removed/damaged air filter.

•Damage caused by dirt, pressure or steam cleaning the unit, salt water, corrosion, rust, varnish, abrasives, and moisture.

•Defects, malfunctions or failures resulting from abuse, misuse, neglect, modifications, alterations, normal wear, improper servic- ing, or use of unauthorized attachments.

•Incorrect storage procedures, stale fuel, including failure to provide or perform required maintenance services as prescribed in the operator’s manual. Preventative maintenance as outlined in the operator’s manual is the customer’s responsibility.

•Failures due to improper set-up, pre-delivery service or repair service by anyone other than authorized Shindaiwa servicing dealer during the warranty period.

•Certain parts and other items are not warranted, including but not limited to: lubricants, starter cords, and engine tune-ups.

•Use of spark plugs other than those meeting performance and durability requirements of the OEM spark plug listed in the Opera- tor’s Manuals.

•Overheating or carbon scoring failures due to restricted, clogged exhaust port or combustion chamber, including damage to spark arrester screen.

•Adjustments after the first (30) thirty days and beyond, such as carburetor adjustment and throttle cable adjustment.

•Damage to gears or gear cases caused by contaminated grease or oil, use of incorrect type or viscosity of lubricants, and/or failure to comply with recommended grease or oil change intervals.

•Damage caused by pump or sprayer running dry, pumping or spraying caustic or flammable materials, or lack of or broken strainers.

•Additional damage to parts or components due to continued use after operational problem or failure occurs. Should operational problem or failure occur, the product should not be used, but delivered as is to an authorized Shindaiwa servicing dealer.

It is a dealer’s and/or customer’s responsibility to complete and return the warranty registration card supplied with your Shindaiwa product or by visiting WWW.SHINDAIWA.COM. Your receipt of purchase including date, model and serial number must be main- tained and presented to an authorized Shindaiwa servicing dealer for warranty service. Proof of purchase rests solely with the cus- tomer. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you. Some states do not allow the exclusion or limitation of incidental or consequential damages, so you may also have other specific legal rights which vary from state to state. This limited warranty is given by ECHO Incorporated, 400 Oakwood Rd., Lake Zurich, IL 60047.

DISCLAIMER OF IMPLIED WARRANTIES

This limited warranty is in lieu of all other expressed or implied warranties, including any warranty of FITNESS FOR A PARTICU- LAR PURPOSE OR USE and any implied warranty of MERCHANTABILITY otherwise applicable to this product. ECHO, INC. and its affiliated companies shall not be liable for any special incidental or consequential damage, including lost profits. There are no warranties extended other than as provided herein. This limited warranty may be modified only by ECHO, INC.

99922201031

06/2010

22

Page 21 Page 23
Page 22
Image 22
Shindaiwa HT254EF, X7502864200 manual Purchased Repair Parts and Accessories
Page 21 Page 23

X7502864200, HT254EF, HT254 specifications

The Shindaiwa X7502864200, also known as the HT254 and HT254EF, is a high-performance hedge trimmer designed for both professional landscapers and avid home gardeners. This tool stands out in the market due to its powerful engine, durability, and advanced features that enhance efficiency and user experience.

One of the key features of the HT254 is its robust, low-emission 25.4cc engine. This engine is designed to deliver exceptional power while adhering to stringent environmental regulations. It not only ensures a longer run time but also contributes to a cleaner, greener working environment. The engine’s low-vibration design reduces operator fatigue, making it ideal for extended use during large landscaping projects.

A notable technology incorporated in the HT254 is the heavy-duty double-sided reciprocating blades. These blades are engineered to provide precise cutting performance, allowing for clean and efficient trimming of hedges and shrubs. The sharp edges ensure that users can handle thicker branches with ease, resulting in a more polished finish. Additionally, the blades are constructed from high-quality materials that resist wear and corrosion, promising longevity and less frequent replacements.

The design of the HT254 also prioritizes user comfort and control. It features an ergonomic handle with a comfortable grip, enabling easy maneuverability during operation. The adjustable cutting angles allow operators to reach various heights and angles without straining, making it suitable for a variety of hedge types and styles.

Another important characteristic of the HT254 is its lightweight construction. Weighing in at just over 10 pounds, the tool is easy to carry and operate, reducing the physical strain often associated with heavier machines. The inclusion of a manual recoil starter ensures that users can start the engine reliably without frustration.

The HT254EF variant adds an electric start option for even more convenience, allowing users to start the engine with just the push of a button. This feature is particularly beneficial for those who may struggle with traditional pull-start mechanisms.

Overall, the Shindaiwa HT254 and HT254EF hedge trimmers are equipped with advanced technologies and exceptional features that elevate their usability and efficiency. Whether for professional landscaping businesses or personal gardening tasks, these tools deliver power, precision, and user-friendly operation, making them a valuable addition to any garden care toolkit.
Top Page Image Contents