Starting the Engine

IMPORTANT!

Engine ignition is controlled by a two position switch mounted on the throttle housing labeled, “I” for ON or START and “O” for OFF or STOP.

WARNING!

The attachment will operate immediately when the engine starts and could result in loss of control and possible serious injury. Keep movable parts of the attachment away from objects that could become entangled or thrown.

WARNING!

Never start the engine from the operating position.

1.Slide the ignition switch to the “ON” position.

2.Set the throttle trigger to the “fast idle”:

a.Squeeze the throttle trigger toward the handgrip on the shaft tube.

b.Depress and hold the throttle lock button.

c.While depressing the throttle lock button, release the throttle trigger.

3.Press the primer bulb until fuel can be seen flowing in the trans- parent return tube.

IMPORTANT!

The primer system only pushes fuel through the carburetor. Repeatedly pressing the primer bulb will not flood the engine with fuel.

4.Set the choke lever to the CLOSED position if engine is cold.

5.While holding the outer tube firmly with left hand. Use your other hand to slowly pull the recoil starter han- dle until resistance is felt, then pull quickly to start the engine.

CAUTION!

Do not pull the recoil starter to the end of the rope travel. Pulling the recoil starter to the end of the rope travel can damage the starter.

WARNING!

The cutting attachment may move when the engine is started!

Throttle Lock

Ignition

switch

Button

 

ON

Throttle

trigger

Slide ignition to ON

Close choke

Set the choke lever to the CLOSED position

6.When the engine starts, slowly move the choke lever to the “OPEN” position. (If the engine stops after the initial start, close the choke and restart.)

7.Operating the throttle will automati- cally disengage the fast idle setting.

IMPORTANT!

If the engine fails to start after several attempts with the choke in the closed position, the engine may be flooded with fuel. If flooding is suspected, refer to the ”Starting a Flooded Engine” section of this manual.

Primer Bulb

Press primer bulb...

Hold

the unit

firmly...

...and pull recoil

Make sure the

attachment is clear

starter handle

of obstructions!

upward

 

Open

After engine starts, move choke to OPEN position

12

Page 11 Page 13
Page 12
Image 12
Shindaiwa X7502825601, C254 manual Starting the Engine, Press primer bulb
Page 11 Page 13

C254, X7502825601 specifications

The Shindaiwa X7502825601 C254 is a robust and versatile brush cutter designed for both professional landscapers and passionate garden enthusiasts alike. Known for its high performance and durability, this powerful tool seamlessly combines advanced technology with user-friendly features, making it a go-to choice for tackling tough jobs.

One of the main features of the Shindaiwa C254 is its impressive engine. Equipped with a 25.4cc two-stroke engine, this brush cutter delivers ample power while remaining lightweight, making it easy to maneuver and handle for extended periods. The engine’s design emphasizes fuel efficiency without compromising performance, allowing users to complete their tasks effectively and save on fuel costs.

The C254 is also recognized for its innovative Easy Start technology. This system minimizes the effort required to start the machine, enabling users to get to work quickly without the frustration of cumbersome starting rituals. The low vibration design significantly enhances comfort, reducing user fatigue during extended use and ensuring increased productivity.

The brush cutter features an ergonomic handle with a comfortable grip, designed with the user in mind. The two-hand operation allows for better control, especially when navigating through dense vegetation or uneven terrain. Its lightweight construction further aids in handling, making it suitable for prolonged use without strain.

In terms of versatility, the Shindaiwa C254 comes equipped with detachable cutting attachments, including a blade and a trimmer head. This allows users to switch between heavy-duty cutting and precise trimming with ease, making it suitable for a wide range of landscaping tasks—from clearing thick brush to edging lawns.

Durability is another hallmark of the C254. Constructed with high-quality materials, this brush cutter is built to withstand the rigors of tough outdoor environments. Additionally, Shindaiwa offers a strong warranty and reliable service options, ensuring peace of mind for users.

In conclusion, the Shindaiwa X7502825601 C254 stands out in the brush cutter market with its powerful engine, user-friendly features, and exceptional versatility. Whether you are a professional landscaper or a dedicated DIY gardener, the C254 offers reliable performance, making yard work more efficient and enjoyable.
Top Page Image Contents