Shiro ADSL 2/2+ Ethernet Modem manual To setup the telephone POTS Splitter

User Manual

POTS Splitter

A phone line can carry phone call and Internet signals. When you enable the phone line for high speed Internet, the connection produces high-pitched tones when using the phone. Installing a Plain Old Telephone Service (POTS) splitter separates the two signals and eliminates the noise.

To setup the telephone POTS Splitter:

1.Locate the phone jack in your house.

2.Insert the POTS Splitter into the phone jack.

3.Plug one end of the telephone cable from the POTS Splitter’s TEL port and then plug the other end into the telephone.

2.Plug one end of the Ethernet cable from the router’s ETHERNET port and then plug the other end into a broadband router’s WAN port.

3.Connect the computer into an available LAN Ethernet port in the broadband router. In this setup, the router merely acts as a dialer for the broadband router. Broadband routers, by itself, do not have the capability to connect to an ADSL service because it does not have a DSL port. To connect to the Internet, use the connection settings of the broadband router.

Page 16 of 92