Shiro ADSL 2/2+ Ethernet Modem manual Policy Routing Configuration

User Manual

Policy Routing Configuration

The Policy Routing Configuration enables you to configure policy routing and QoS.

Policy Routing Configuration

Field	Description
Ingress Inter face	The incoming traffic interface for a Policy Routing rule. Selections include LAN interfaces, WAN
	interfaces, Locally generated (traffic), and not applicable. Examples of Locally generated traffic
	are: voice packets, packets generated by applications such as DNS, DHCP, etc.
Destination	The outgoing traffic interfaces for a Policy Routing rule. Selections include LAN Interfaces and
Interface	WAN interfaces.
DiffServ Code	The diffServ code point (DSCP) field value ranges from 1 to 255. This field cannot be configured
Point	alone, additional fields like IP, Source MAC, and/or Ingress Interface should be configured.
Class of Service	The selections are (in the order of priority): CoS1, CoS2, CoS3, CoS4, CoS5, CoS6, and N/A.
Source IP	The IP address of the traffic source.
Mask	The source IP Netmask. This field is required if the source IP has been entered.
Destination IP	The IP address of the traffic destination.
Mask	The Netmask of the destination. This field is required if the destination IP has been entered.
Protocol	The selections are TCP, UDP, ICMP, Specify, and none. If you choose Specify, you need to enter
	the protocol number in the box next to the Protocol field. This field cannot be configured alone,
	additional fields like IP, Source MAC, and/or Ingress Interface should be configured. This field is
	also required if the source port or destination port has been entered.
Source Port	The source protocol port. You cannot configure this field without entering the protocol first.
Destination Port	The destination protocol port or port range. You cannot configure this field without entering the

Page 67 of 92