Shiro ADSL 2/2+ Ethernet Modem manual Check Enable Bridge Filters

User Manual

Bridge Filters

The Bridge Filters allows you to enable, add, edit, or delete the filter rules. When bridge filtering is enabled, each frame is examined against every defined filter rule in sequence. When a match is found, the appropriate filtering action (allow or deny) is performed. Up to 20 filter rules are supported with bridge filtering.

Bridge Filters

To configure Bridge Filters:

1.From the Advanced Menu, select Application > Bridge Filters. This opens the Bridge Filters page.

2.Check Enable Bridge Filters.

3.To add a rule, enter Src MAC address, Src Port, Dest MAC address, Dest Port, Protocol, and Mode, then click Add.

Note: You can also edit a rule that you created using the Edit checkbox. You can delete using

Delete.

4.Click Submit to temporarily activate the settings.

5.To make changes permanent, click Save Settings.

Page 52 of 92