Shiro ADSL 2/2+ Ethernet Modem manual LAN Group Configuration, Category, Field, Description

User Manual

LAN Group Configuration

LAN Group Configuration allows you to configure settings for each LAN group. Notice that you can also view the status of advanced services that can be applied to a LAN group. Green indicates that the service is enabled, while red indicates that the service is disabled.

LAN Group Configuration

Category	Field	Description
Unmanaged		Unmanaged is a state when the LAN group is not configured and
		no IP address has been assigned to the bridge.
Obtain an IP address		When this function is enabled, your router acts like a client and
automatically		requests an IP address from the DHCP server on the LAN side.
	IP Address	You can retrieve/renew an IP address from the DHCP server
		using the Release and Renew buttons.
	Netmask	The subnet mask of your router.
PPP IP Address		Enables/disables PPP unnumbered feature.
	IP Address	The IP address should be different but within the same subnet as
		the WAN-side IP address.
Use the following Static IP		This field enables you to change the IP address of the router.
address
	IP Address	The default IP address of the router (as shown) is 192.168.1.1.
	Netmask	The default subnet mask of your router is 255.255.255.0. This

Page 39 of 92