SC3112 User Guide
4
1. INSTALLING OR REPLACING THE BATTERY
Install 2 Alkaline AAA batteries into the battery compartment and re-fit the cover before use.
IMPORTANT—before removing the battery compartment cover, ensure the base unit
is disconnected from the telephone line.
Connection and conditions for use
You can connect your SC3112, to public networks in the United Kingdom or to an
approved PBX using DTMF signaling. Each item of telephone equipment (phones, fax
machines, etc.) has a ringer equivalence numbers (REN). The RENs of all
equipment connected to an exchange line must not add up to more than 4
otherwise, one or more phones may not ring and/or answer calls correctly.
SC3112 has a REN of 1, and most other telephones have a REN of 1 unless marked
otherwise.
RINGER HI/LO Switch
Select your preferred ringer volume either HI or LO. The selection is at the back of the
telephone.
HANDSFREE Volume Slider
Select your preferred Handsfree volume through the adjustment slider located at the side of
the telephone.
In on-hook position, press SET key to begin settings. You would see the LCD panel display
SE12345678 flashing. Press UP/DOWN or number key to change the settings. To set each
item, press SET key. To exit menu, press SET key.
SET ITEM OPERATIONS
DATE/TIME Press SET key. Press 1 to display 1-dATE 2-CL.
Press 1 to set the date. The year, month and date will be flashing on