Shure UA888, UA111 System Components, System Features, Minimum Computer Requirements, English

SYSTEM DESCRIPTION

The Shure UA888/UA111 System lets you use a computer to monitor and control up to 64 Shure UHF Wireless receivers. It is de- signed for installed sound reinforcement applications, including theaters, larger houses of worship; touring sound systems; and au- dio/video rental applications.

System Components

SUA888 or UA111 Interface Module

SWindows-based Shure Wireless Workbencht software

SConnecting cables

SAn IBM compatible PC (not supplied)

SShure U4S or U4D diversity UHF receivers. (Shure U4 receivers are supplied separately).

System Features

SMonitors and controls* up to 32 receivers (64 channels maximum)

SRF level monitor

SDiversity signal monitor

SAudio level monitor

STransmitter battery level monitor function

SName/label monitor and control

SFrequency monitor and control

SFrequency group/channel monitor and control functions (TV channels in U.S. models)

SSquelch monitor and control

SReceiver lock/unlock

SRF level history function that identifies ”dead” spots in the performing area

SFrequency scanner function that identifies local RF activity

SRS–232 serial interface

SShure Linkt interfaces to other Shure devices (UA888 only)

SScene creation and storage capability

*NOTE: The “Monitor” feature lets you view various wireless system parameters and observe RF and audio performance, in real time, on the computer monitor. The “Control” feature lets you actually change receiver parameters from your computer terminal.

Trademark Notification: Shure is a registered trademark of Shure Incorporated. Shure Linkt and Shure Wireless Workbencht are trademarks of Shure Incorporated. IBM is a registered trademark of International Business Machines Corporation. Microsoft is a registered trademark of Microsoft Corporation.

Minimum Computer Requirements

S300 MHz IBM-compatible computer

S32 MB RAM

S20 MB hard drive

SWindows 98 or later (including Windows 2000 and Windows XP)

SOne available RS–232 serial COM port

SOne RS–232 cable

Interface Module Connectors and Controls

3

1 2

5

5 6

UA888

1.Power On LED. This LED glows green when the UA888 Interface Module is turned on.

2.Power ON/OFF Switch. Turns the UA888 Interface Module on and off.

3.25-Pin Connectors. Provide connection for up to eight Shure U4S (single) or U4D (dual) UHF receivers.

4.Shure Link Device Identification DIP Switches. These DIP switches are used to set the Link Device I.D. Number. When multi- ple UA888 Interface Modules are linked, each one is assigned a Link Device Identification Number (0, 1, 2, or 3). Each UA888 Interface Module comes with a factory preset Device I.D. of 0 (both switches in the down position).

5.9-PinRS-232 Port. Connects the UA888/UA111 to an IBM–compatible PC.

6.Shure Link Interface. Allows up to four UA888 Interface Modules to be linked together.

ENGLISH – 6 –