Gigaset 200, GBR, A31008-G200-B101-1-7619

TELEF.FM

28.09.01

Displaying the caller's number (CLIP)

The prerequisites for this function are as follows:

You must have applied for CLIP from your network provider.

The network provider must support call number display (CLIP).

The call number must be transmitted when the caller calls.

When a call is made,

E

the call number

￿￿￿￿￿￿￿￿￿

appears on the display

 

(example).

 

8If the call number consists of more than twelve digits, an omission mark appears at the beginning of the line ( --).

If the call number is not displayed, the following appear:

￿If you have not applied for CLIP.

If the display of the number is "sup- pressed" by the caller or if the caller has not applied for call number transmission.

Activating/deactivating the key lock

If you "lock" the keys, any inadvertent touching of the keys remains without effect. In order to answer an incoming call, press the off-hook key ￿.

3

To activate the lock, hold down

 

the key – you will here an

 

acknowledgment tone*. The ￿

symbol appears on the display. To deactivate the lock, hold down the 3￿key again.

The symbol disappears.

*Acknowledgment tone = ascending sequence of tones

Error tone = descending sequence of tones

11

Page 11
Image 11
Siemens 200 manual Displaying the callers number Clip, Activating/deactivating the key lock