Gigaset 200, GBR, | VORBEREI.FM | 28.09.01 |
Step 3: Place the handset on | C |
the base unit |
In order to make calls, you need to register your hand- set with the base unit (to make it known to it). The fol- lowing text appears on the display: "SEARCH BASE".
Put the handset on the base unit with the display visible. The following text appears on the display: "REGISTER HS".
It takes around a minute for the handset to be registered with the base unit. The idle display (battery symbol) appears instead of the display "REGISTER HS".
Step 4: Charge the batteries | 5 h |
Leave the handset on the base unit for around five hours in order to charge the batteries. A charging indicator on the handset shows that the batteries are being charged:
H Batteries empty | GBatteries 1/3 |
(symbol flashes) | charged |
FBatteries 2/3 charged | EBatteries full |
Your phone is now ready for operation; you can start calling.
Note on the battery
8● After the batteries are charged for the first time, you can put the handset back on the base unit again after each call. Charging is controlled electronically. This ensures that the batteries are charged optimally and economically.
●The batteries become warm during charg- ing; this is normal and not dangerous.
●The charging status of the batteries is only displayed correctly after an uninterrupted charging/discharging process. You should therefore avoid opening the battery compartment unnecessarily.
8
