Gigaset 200, GBR, | VORBEREI.FM | 28.09.01 |
●Use only the
!provided, as indicated on the bottom of the base unit.
●Important: new phone cable. Use only the enclosed cable type.
●If you purchase another cable, ensure that it has the correct connector pin assignment.
Step 2: Put the handset into operation
The display is protected by a plastic foil.
Please remove the protective foil.
Inserting the batteries
+ | + |
– | – |
– | – |
+ | + |
●Insert the batteries with the correct polarity – see figure.
●Put the lower end of the battery compartment cover in position (see arrow), and press against the _ribbing at the top until it engages.
●To open it, lift the cover by the ribbing.
●Use only approved, rechargeable batter-
!ies of the same type. Otherwise you risk damaging your health and the product.
●Do not use charging units belonging to other devices because they could damage
the batteries.
7
