Siemens 21-115532-001 manual Introduction, Qualified Person

Models: 21-115532-001

1 28
Download 28 pages 10.88 Kb
Page 5
Image 5
INTRODUCTION

INTRODUCTION

Page 1

Type JFR single-phase step-voltage regulators are designed

QUALIFIED PERSON

to give dependable service and to make installation, operation

 

and maintenance as simple as possible.

 

 

Technology advances, especially in the realm of the control apparatus, make it efficient to provide a separate instruction manual for the Accu/StatTM control provided with this JFR Regulator. For specific control information, refer to the Accu/StatTM control manual included with the regulator.

Hazardous Voltage. Death or serious injury from electrical shock, burns will result from misuse.

To prevent:

Do not service or touch until you have de-energized high voltage, grounded all terminals and turned off control voltage. Grounding terminals with line to ground capacitors may produce a small arc.

Only qualified personnel should work on or around this equipment after becoming thoroughly familiar with all warnings, safety notices, instructions and maintenance procedures contained herein.

The successful and safe operation of this equipment is dependent upon proper handling, installation, operation and maintenance.

FOR THE PURPOSE OF THIS MANUAL AND PRODUCT LABELS, A QUALIFIED PERSON IS ONE WHO IS FAMILIAR WITH THE INSTALLATION, CONSTRUCTION AND OPERA- TION OF THE EQUIPMENT, AND THE HAZARDS INVOLVED. IN ADDITION, HE HAS THE FOLLOWING QUALIFICATIONS:

(a)Is trained and authorized to de-energize, clear, ground and tag circuits and equipment in accordance with established safety practices.

(b)Is trained in the proper care and use of protective equipment such as rubber gloves, hard hat, safety glasses or face shields, flash clothing, etc., in accordance with established safety practices.

(c)Is trained in rendering first aid.

Distinctive signal words (DANGER, WARNING, CAUTION) are used in this instruction book to indicate degrees of hazard that may be encountered by the user. For the purpose of this manual and product labels these signal words are defined below.

DANGER Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury

WARNING Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury.

CAUTION Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Page 5
Image 5
Siemens 21-115532-001 manual Introduction, Qualified Person