Module Summary
The following table (pages 5–2 through 5–11) lists all of the modules
available in the current version of the 9700 Power Meter. The table shows
how many of each module are available, how many of each are used in the
factory configuration, and how many are high-speed capable (high-speed
capable modules update every cycle; standard modules update every
second).
The Module Summary table also shows the ranges or options available for
each module’s setup registers and the setting each register holds when a
new module is created.

Setup Register Creation Defaults

It is important to note that the creation defaults shown in the table apply
only to new modules when they are created in the device. The setup
register settings shown do not apply to modules that are included in the
factory configuration. Many of the modules in the factor y configuration
have been configured with custom settings.
Module Summary Table
Module
Name Total
Available
in 9700
Used in
Factory
Config.
High-
Speed
Capable
Setup Registers Range or Options Creation Default
Message Up to 120 characters
default message
Priority 0 to 255 128
Destination Up to 50 characters 9,999-999-9999
Type WinPM, alphanumeric
Pager, Numeric Pager or
ASCII
WinPM
Pager Num Up to 16 characters
empty
Com Port Com 1, Com 2, Com 3 or
Not a port Not a port
Attempts 1 to 20 3
Retry Time 5 to 86400 15
Lockout Time 0 to 86400 0
Location Up to 50 characters
meter’s network name
Alert 10 none 10
Modem Init Up to 50 characters AT Q0V1E0