7 and 14 Status Display Screens
The screens displaying 7 and 14 values are best suited for viewing close-up.
To set up a 7 or 14 status display screen:
1. Enter the parameter handle of the first register whose status you want to
display on the screen, then press ENTER. If you want to keep the register
that is currently in use, press the button labeled KEEP PREVIOUS.
2. Repeat step 1 for the remaining 6 or 13 registers (depending on which
display you selected) whose status you want to display.
3. Once you have entered the parameter handles, you are prompted for a
title for the display screen. Enter a title of up to 26 characters, then
press the ENTER button. If you want to keep the title that is currently in
use, press the button labeled KEEP PREVIOUS.
When you view your status display screen, the labels of the selected
registers are displayed; if no labels have been defined, the default register
names appear. To the right of each label, the state of the register is
displayed. This can be either the associated Boolean ON or OFF label, or, if
no Boolean ON/OFF labels have been defined, simply ON or OFF.
Boolean register status is
shown here. If Boolean
ON or OFF label have
been defined, these labels
are displayed instead.
The screen title
is shown here.
The register label
is displayed (or
the register name
if no label has
been setup).