Configure ION
The Configure ION menu provides access to the setup registers of every ION
module in the 9700 Power Meter. To edit a module’s setup registers with
the MGT, press SETUP then CONFIGURE ION. The Feature Manager appears,
listing all of the module types available. Follow this procedure to access a
setup register:
1. Use the arrow buttons to highlight the type of module you want to
configure. The list of available modules occupies multiple MGT screens
— when you get to the bottom of a screen, press ENTER when the word
“more…” is highlighted to see the next group of module types. When
the type of module you want to configure is highlighted, press ENTER to
view the available modules of that type.
2. Use the arrow buttons to highlight the module you want to configure,
then press ENTER. The module’s setup registers appear, with their
current settings displayed on the right.
3. Use the arrow buttons to move through the setup register listing until
the register you want to configure is highlighted. Press ENTER, then
enter your password to access the register’s setting (use ‘0’ if you have
not configured a password). Press ENTER again after keying in your
password.
4. Use the keypad to enter the new value, or use the arrow buttons to
select the desired option from the list. Press ENTER to send the new
setup register value to the 9700 Power Meter. (Press ESC if you want to
leave the screen without making any changes.)
Refer to Chapter 5 in this guide for a listing of the supported ranges or
options for each module in the 9700 Power Meter.