Siemens A50 manual During a call Headset, §Menu§ Î Setup During a call, Auto answer

Setup 61

During a call		Headset
§Menu§ Î Setup	Î During a call	§Menu§ Î Setup
Î then select a function:		If an original Siemens Headset
Call waiting	~	(p. 69) is used the profile is activated
		automatically as soon as the headset
If you are registered for this service		is plugged in.
you can check whether it is set, and		User-definable settings
you can activate or deactivate it
		Auto answer
(p. 14).
Hide ID	~	(factory default: off)
		Calls are automatically accepted af-
When you make a call, your number		ter a few seconds (except where the
may be displayed on the recipient's		ringing tone is switched off or set to
display (depending on the service		beep). You should therefore be wear-
providers).		ing the headset.
To suppress this display, you may		Unwanted listening-in is possible!
activate the "Conceal ID" mode for		Automatic setting
the next call or for all subsequent
calls. You may need to register sepa-		Accept call with the Call key or PTT
rately with your service provider for
		key (Push To Talk) when the key lock
these functions.
		is activated.
		Automatic answer
		If you fail to notice an incoming call there is
		a risk that it may be overheard by others.