Getting Started

7

Charge battery

The battery is not fully charged when delivered, so:

Plug in charger cable at the bot- tom of the phone, plug in the plug- in power supply unit to the mains power socket and charge for at least two hours.

If the battery is totally discharged no charge icon is displayed at the beginning of the charging process.

If this is the case leave the charger cable plugged in, the charge icon will appear after a maximum of 2 hours. The battery is then automatically charged.

Push the sides of the charger ca- ble plug together and pull to re- move it.

Functions without SIM card

To display the functions that can be

used without SIM card, switch on the phone without the SIM card:

§Menu§ Press soft key. Special case:

§SOS§ Emergency number, SOS (p. 10).

Charging

The charger heats up when used for long

ÁWhen charging is in progress. e End of charging.periods. This is normal and not dangerous.

An empty battery is fully charged after about 2 hours. Charging is only possible in an am- bient temperature of 5 °C to 40 °C (the charge icon flashes as a warning when the temperature is 5 °C above/below this range). The voltage specified on the power supply must not be exceeded.

Operating times

Afully charged battery provides 60-250 hours of standby time or 100-300 minutes of talk time. The operating times are aver- age values and depend on the operating conditions (see table below).

Charge level display (full-empty): a}b{c

A beep sounds when the battery is nearly empty.

Operation carried

Time

Decrease of

out

(min)

standby time by

Calling

1

30 to 60 minutes

Display back

1

30 minutes

light *

 

 

Network search

1

5 to 10 minutes

* key input, games, organiser etc.

Page 8
Image 8
Siemens A50 manual Charge battery, Functions without SIM card, Charging, Operating times