6

Getting Started

 

 

 

Insert SIM card/battery

The service provider supplies you with a SIM card on which all the im- portant data for your line is stored. If the SIM card has been delivered in credit card size, snap the smaller segment out and remove any rough edges.

Press grooved area n, then lift cover o.

on

Insert SIM card in the opening (contacts pointing downwards) and push gently until it engages

(make sure the angled corner is in the correct position r).

r

Press latch in the direction indicat- ed by the arrow p, Lift battery at

the cutout on the side of the phone q, then tilt upwards and re- move.

p

q

Insert battery into the phone side-

ways s, then press downwards t, until it engages.

t

s

Replace cover and press down- wards until it engages.

Only 3-Volt SIM cards are supported. Older SIM cards (5-Volt technology) cannot be used. Please contact your service provider, if you have an older card.

Page 7
Image 7
Siemens A50 manual Insert SIM card/battery