48Divert
You can set the conditions for which calls are diverted to your mailbox or other numbers.
§Menu§ Î Divert
Set divert:
The most common condition for for- warding is:
Unanswered
§Menu§ Î Divert
N Select Unanswered.
§Select§ Press.
Set Select.
J Enter the phone number to which a call will be di- verted (if not done already)
or
@select the phone number from the Phonebook or from the §Mailbox§. Confirm with:
§OK§ After a short pause, the setting is confirmed by the network.
Unanswered
This setting covers the most important con- ditions (see also below):
Not reachable, No reply, Busy
All calls
All calls are diverted.
o Symbol in the top line on the display in standby mode.
Spec. divert
Not reachable
Divert if the phone is switched off or out of range.
No reply
A call is only diverted after a short delay (depends on the network). The period can be set by the user to a maximum of 30 seconds in 5 sec- ond intervals.
Busy
Divert if a call is in progress.
Exception: If Call waiting is activated (p. 61), you will hear the call waiting tone (p. 14) during a call.