22 Setup
Call setup
§Menu§ ¢m¢Call setup ¢Select a function
Hide ID | b |
When switched on, the display of the calling party shows your phone number (de- pendent on service provider).
Call waiting | b |
If you are registered for this service, you can check whether it is set and you can activate/deactivate it with Call waiting.
Call Forward
You can set the conditions for which calls are diverted to your mailbox or other numbers.
Set up call divert (example):
• All calls
All calls are diverted. nis shown in the top line of the display in standby mode.
• Unanswered
Includes Unanswered, Not reachable, No reply, Busy.
§Select§ ¢Set ¢J(Enter the phone
number, to which the call should be diverted) ¢§OK§
After a short pause, the setting is confirmed by the network.
Other divert options: Not reachable, No reply, Busy
• Status check
After a short pause the current information is shown.
pCondition set.
oNot set.
sDisplay if status is unknown (e. g. with a new SIM card).
• Clear all
All set diversions are cleared.
Any to answer
Incoming calls can be accepted by pressing any key
(except for B).
Minute beep
During the call, you will hear a beep after each minute as a reminder of the time elapsed. The recipient does not hear this beep.