8 | Getting started |
Getting started
Using the SIM card/battery
Your phone's display is delivered with a protective film. Remove this film before getting started. To avoid damage to the dis- play, the phone should not be used without the front cover. The service provider supplies you with a SIM card on which all the important data for your account is stored. If the SIM card is credit
Remove the battery cover upwards 1.
1
6
5
7
To remove, press the retaining tab 7 then lift the battery out.
Insert the battery cover by the tabs at the bottom 8, then press downwards 9, until it engages.
9
8
Insert SIM card 2and push it fully into the locating slot (make sure the angled corner is in the correct position 3). Then push the retaining catch over the top of the SIM card 4.
2
4
3
Insert the battery sideways into the phone 5, then press downwards 6 until it engages.
Always switch off phone before removing the battery!
Only 3V SIM cards are supported. Please contact your service provider if you have an older card.
Functions without SIM card p. 10.
Charging the battery
The battery is not supplied fully charged. Plug the charger cable into the bottom of the phone, plug the power supply unit into a mains power socket and charge for at least two hours. The power supply unit will become hot after extended use. This is normal and is not dangerous.