Switching on/off, PIN | 9 |
Display when charging is in progress
h
Charging time
An empty battery is fully charged after about 2 hours. Charging is only possible within a temperature range of +5 °C to +40 °C. If the temperature rises/falls 5 °C above/below this, the charge symbol flashes a warning. The voltage specified on the power supply unit must not be exceeded.
Charge icon not visible
If the battery was fully discharged, the charging symbol will not be immediately visible on connection to the power supply unit. It will appear after up to two hours. In this case the battery is fully charged after 3 - 4 hours.
Only use the power supply unit provided! Display while in service
Charge level display during operation
a d g
A beep sounds when the battery is nearly empty. The charge level of the battery is displayed correctly only after uninterrupted charging/discharging. You should therefore not remove the battery unnecessarily and where possible not interrupt charging prematurely.
Switching on/off, PIN
Turning the phone on/off
Press and hold the On/Off/End key Bto switch on or off.
Enter PIN
The SIM card can be protected with a 4- to
Enter the PIN using the number keys. The characters **** appear to ensure nobody
can read your PIN on the display. Correct errors with §Clear§.
Confirm your input with §OK§. Logging on to the network will take a few seconds.
Switching on your phone for the first time
Time/date
The clock must be set to the right time once at
Press §Yes§. First enter the date (day/month/ year), then the time (24 hours, including seconds). Press §OK§. The time and date are updated.
If the battery is removed for longer than 30 seconds, the clock must be reset.
Time zones
Specify your current time zone.
Select the desired time zone from the list with F. Apply it with §Set§.
Strong reception signal
_Strong receive signal.
^A weak signal reduces the call- quality and may lead to loss of the connection. Change your location.