39
Factory settings
Select »Factory settings« and your
phone will automatically revert to
its original setup:
Watch: 24h mode
Language: Automatic
Network
selection: Automatic
Ringing tone: Standard
Ringing
volume: High
SMS tone
volume: High
Broadcast tone
volume: High
Key tone: On
Dial mode: Speed dialling
Greeting: None
Facts & Tips
• Read about location numbers in the
chapterabout your phone book (p. 12)
• USSD (Unstructured Supplemen-
tary Service Data) is a feature com-
pletely defined by yournetwork allow-
ing direct communication between
you and yournetwork. An example of
a USSD could be that entering a cer-
tain code of digits and/orletters termi-
nated by a
#
tells yournetwork to
send you a scale of charges.
• The survey at p.12 tells you how to
find the different characters on your
phone’s keypad when you want to
write e.g.a USSD or a new welcome
greeting.
Setup menu
Phone setup38
Enterthe setup menu
by pressing »MENU«
Select »Phone setup«
Dial mode
Dial mode allows you to choose
between the following two fea-
tures.These two features cannot
be active at the same time,and
selecting one of them will automat-
ically deactivate the other:
Speed dialling Activate »Speed
dialling« to make it possible to call
any numbers in yourphone book
just by using the location number.
Press the location numberfor one
second,and the call will be initiated
automatically.If the location num-
berconsists of more than 1 digit,
press the first digit(s) and hold the
last digit forone second.
Text dialling Activate »Text dialling«
to set the phone in alpha mode.
This enables you to entera USSD
with both letters and digits instead
of only digits.Remember that a
USSD must always be terminated
by pressing the # key and then
»CALL«.
Greeting
Make a welcome greeting on your
phone according to yourown wish-
es.Delete the old greeting, if any,
by holding down »CLEAR«,enter
the new greeting via the keypad
and confirm by pressing »OK«.
(This function may not be available
on all networks).
Setup menu
First