Siemens M35 or S35, C35i manual Acall Automatic Alarm Calling

	XXppppMCALLVnumber *1)
Command
Pppp	Four digits of current PIN
Number	Maximum 14 digits of number of any phone *2)

*1) The space is between key word of command „MCALL“ and value of parameter „h“

*2) Number can be entered in national format – e.g. 606445566 but also in international format – e.g. +420606445566. No number is activated from production.

After entering this parameter GB 051 calls set number once a month in order to spend at least one tariff impulse.

If you want to use this service it is recommended to set-up number of your fax or number of time information. It is not recommended to set your cell phone number because GB 051 does not use real time and call can come during night.

If you want to deactivate this function set command without parameter – for example XXppppMCALL without further parameters.

4.6. ACALL – Automatic Alarm Calling

By activation of any of SMS inputs set phone number is automatically chosen together with sending SMS message. Dispatched SMS message can be highlighted if you set ACALL number identical to SMSNO number or you can report alarm on fixed phone lines where SMS messages cannot be received. After answering warning tone is generated into speaking line.

	XXppppACALLiVnumber *1)
Command
Pppp	Four digits of current PIN
i	Number of input: 1 to 8
Number	Maximum 14 digits of number of any phone which allows
	display of caller’s number *2)

*1) The space is between key word of command „ACALLi“ and number

*2) Number can be entered in national format – e.g. 606445566 but also in international format – e.g. +420606445566. No number is activated from production.

If you want to deactivate this function set command without parameter – tm. XXppppACALLi without further parameters.

4.7. INFOSMS – Sending of Information Messages about Operation

GB 051 allows set-up of one cell phone number where all information SMS messages about change of PIN, reset, initialization, power supply failure, change in configuration, operation time and input activation are subsequently sent.

Command	XXppppINFOSMSVnumber (no number activated from
	production) *1)
Pppp	Four digits of current PIN
Number	Maximum 14 digits of cell phone number *2)

*1) The space is between key word of command „INFOSMS“ and number

*2) Number can be entered in national format – e.g. 606445566 but also in international format – e.g. +420606445566.

13