1.Product Description
1.1. Description of Function
GSM Remote Supervision GB 051 consists of plastic box, which is firmly joined to the battery of cell phone. Communication cable with connector gets out of this box into cell phone, which is used by GB 051 for realization of phone connection and reception and sending of SMS messages.
On the upper side of the box there is a
Cable with a connector on the lower side of the box is intended for connecting a mobile phone Siemens (one of those: C35i, M35, S35). There is also a connector for data cable for connection to a PC that enables comfortable set up of required configuration data. All configuration parameters can also be set using SMS messages sent from a mobile phone or Internet.
Red light emitting diode (LED) on the left side signalizes basic operational states, e.g.: correct function, function from backup power supply, GSM connection in ready mode, action in progress, etc.
It is possible to prepare separate text of SMS message and to specify two numbers of cell phones, to which message shall be sent for each of the 8 inputs.
Prepared text of SMS message is sent to specified numbers by activation of one of the 8 inputs and phone call with warning alarm signal is carried out to a predefined number. In case it is not possible to send SMS message or call, the attempt is repeated 10 times in the intervals of 5 minutes.
Each input can be used at the same time as output and it is possible to set up requested value of inputs using SMS message sent from cell phone or Internet.
It is possible to request call with additional sound monitoring of the room by incoming SMS message.
It is still possible to use cell phone connected to GB 051 to carry out outgoing and incoming calls.
GB 051 is
4
