14
If you want to deactivate this function set command without parameter – tm.
XXppppINFOSMS without further parameters.
4.8. SMSINT – Interval for Dispatch of SMS Messages about Operation
Interval for sending regular SMS messages to INFOSMS number, which include
time of operation, can be set:
Command XXppppSMSINTVn (interval of one day is set from production)
*1)
pppp Four digits of current PIN
Number Number from 1 to 30. It is interval for sending successive
message about operation.
*1) The space is between key word of command „SMSINT“ and value of parameter „n“
4.9. ALARMSMS – Alarm SMS Messages
When one of 8 inputs is activated GB 051 allows in addition to phone call to
common ACALL number also sending one of 8 prepared texts of SMS message
to two cell phone numbers.
Change of texts of SMS messages:
Command *1) Initial set-up Input Order on the
terminal
board
XXppppSMSTXT1V“text“
XXppppSMSTXT2V“text“
XXppppSMSTXT3V“text“
XXppppSMSTXT4V text“
XXppppSMSTXT5V“text“
XXppppSMSTXT6V“text“
XXppppSMSTXT7V“text“
XXppppSMSTXT8V“text“
ALARM1
ALARM2
ALARM3
ALARM4
ALARM5
ALARM6
ALARM7
ALARM8
IO1
IO2
IO3
IO4
IO5
IO6
IO7
IO8
1
2
3
4
5
6
8
9
pppp Four digits of current PIN
text 4 - 144 digits, always put in quotes, ?=question
*1) The space is between key word of command “SMSTXT” and “text”
Change of numbers for sending ALARM SMS messages
Text of SMS message No. 1, 2, 3, 4, 5, 6, 7 or 8 will be sent by activation of input
No. 1, 2, 3, 4, 5, 6, 7 or 8 (by connection with terminal No. 7 – ground) on terminal
board of GB 051. Each prepared text of SMS message of particular input can be
sent to two cell phone numbers.
No number is activated from production. These numbers can be set: