Siemens DP450 manual Handset/base station settings, Changing the handset display keys

Handset/base station settings

The handset and base station are precon- figured, but you can change these settings to suit your individual require- ments. You will find the relevant functions in the submenus

v¢ Settings and v¢ Alarm Clock (page 7).

The base station settings are carried out using a registered DP45 handset.

Changing the handset display keys

You can assign different functions to your handset’s display keys. The change is handset-specific.

¤In idle status, press and hold the right or left display key (e.g. §FixedLine§).

The list of possible key assignments is opened.

qSelect a function and press §OK§.

The handset returns to idle status. The labelling for the display key has changed (e.g. §IP§ if IP Call is selected).

Adjusting the loudspeaker volume

You can set the loudspeaker volume for handsfree talking to five different levels and the earpiece volume to three different levels. You can only make these adjust- ments during a call. The handsfree talking volume can only be adjusted when this function is set.

You are conducting an external call.

tOpen menu.

rSelect volume.

Handset/base station settings

§Save§ Press display key if necessary to save the setting perma- nently.

If tis assigned with another function, e.g. toggling:

§Options§ Open menu.

Volume Select and press §OK§. Configure setting (see above).

Setting ringer tones

Set the volume and melody depending on

the type of signalling required.

¢ ¢

v	ÐSettings	Audio Settings
	¢ Ringer Settings

Ext. Calls / Internal Calls / All Select and press §OK§.

¤Change multiple line input:

rSet volume (1–6).

sScroll to the next line.

rSelect melody.

§Save§ Press the display key to save the setting.

In idle status, you can also open the Ringer Settings menu by pressing tbriefly.

Activating/deactivating the ringer tone

You can deactivate the ringer tone on your handset before you accept a call or when the handset is in idle status; the ringer tone can be deactivated permanently or just for the current call. The ringer tone cannot be re-activated while an external call is in progress.

Deactivating the ringer tone permanently

*Press and hold the star key until the µicon appears in the display.

Re-activating the ringer tone

*Press and hold the star key.

19