Handset Setup
Gigaset 8800 Handset
The Gigaset 8800 handset is used exclusively on the Gigaset 8825 system. Up to a
total of eight handsets may be added.
Handset Setup
Before using your handset, follow these steps:
Cordless Handset Registration
The cordless handset that comes with the system is preregistered to the base
station. Additional cordless handsets need to be registered to the base
station.
1If the handset is not already on, press PWR key in the
lower right corner of handset.
2When Please Register is displayed, press OK.
3Enter System PIN and press OK (default is 0000).
4At base station, press MENU.
5Scroll to System Settings by pressing >FWD key and
then press SELECT.
6Enter System PIN and press SELECT (default is 0000).
7Scroll to Mobile Registration by pressing >FWD key
and then press SELECT.
8When Select Intercom Number is displayed on handset, scroll
to number you want to assign, and press OK.
9When completed, you will hear a confirmation beep.
See User Manual for additional options.
IMPORTANT: Charge batteries 12 to 14 hours before using the
handset for the first time. WARNING: Use only NiCd or NiMh
AA rechargeable batteries. DO NOT USE ALKALINE, LITHIUM,
OR NON-RECHARGEABLE BATTERIES.
2Insert batteries
as shown. 3Place cover on back
of handset and push
gently upward until it
clicks into place.
1Remove protective
plastic film from display.
4Place handset
in charger with
display facing
out.
Customer Care: 1-888-777-0211
Or visit our Website: www.icm.siemens.com
Visite nuestro sitio Web para obtener instrucciones en español.
Power key
+
+