If you subscribe to Caller ID from your local telephone company,
complete the steps below for your 7-digit or
10-digit dialing area. If you do not have Caller ID, skip this section.
At the Base Station:
LOCAL DIALING AREA
1Press .
2Scroll to System Settings? and press .
3Enter the default PIN (0000) or your new PIN and press .
4Scroll to Area Codes? and press .
5Scroll to Local Area Code? and press .
6Enter your area code and press .
7Press to exit.
EXTRA AREA CODES
These should be entered if your area includes more than one local area code.
1Press .
2Scroll to System Settings? and press .
3Enter the default PIN (0000) or your new PIN and press .
4Scroll to Area Codes? and press .
5Scroll to Extra Area Code 1?and press .
6Enter your extra area code and press .
7Scroll to Extra Area Code 2?and Extra Area Code 3? to
program extra area codes if necessary.
8Press to exit.
IMPORTANT: Setup of your area code is necessary for accurate dialing
of local numbers from the call log.
IMPORTANT: Leave the Local Area Code option blank in a 10-digit
dialing area (metropolitan areas). Use the Extra Area Codes option
instead. Setup of your area codes is necessary for accurate dialing of
local numbers from the call log. Enter 000 to erase any existing area
code.
Area Code Setup
Press BACK < and > FWD buttons to scroll.
Default PIN number is 0000.