Putting into service
9
gigam101.fm5
21.4.99 Gigaset V.24 Adapter dt/eng:A30853-X400-B104-3-74D1
Installing the program package
Prerequisites for installation
For installation, you need:
●an IBM-compatible PC with the following configuration:
–Win 95, Win 98 or Win NT operating system
–2 MB free hard disk memory
–1 free V.24/RS232 serial interface as
COM port
●the diskette/CD-ROM containing the installation program
Installation
●Start up the PC and close down any programs active after
start-up.
●Disconnect any Gigaset M101 Data units from the power
supply and the PC.
●Insert the data carrier supplied in the drive.
●Under Start, select Settings, then Control Panel. Double-
click the Software icon.
●Select Install. The installation program starts. During instal-
lation, the message "No Gigaset M101 Data connected".
Confirm this message with "OK".
●Terminate the configuration program with "OK"; this con-
cludes the installation operation.
Check installation is successful
The following errors can occur during installation:
If no errors occur, all files are installed in the selected language
version and your PC contains a "Gigaset M101 Data" program
group. This contains the "Set Gigaset" configuration program, a
help function and a text file with current information.
Problem Result
Insufficient memory Error message, please try free-
ing some disk space on your
hard drive.
No COM port free at the
PC Error message, setup can be
completed.
Installation interrupted by
user All components already in-
stalled are removed.
PC crashes during
installation Automatic correction during
next attempt.
Installation of a new
version Recognition, warning and instal-
lation after confirmation.