The Gigaset SE551 WLAN dsl/cable

Procedure for installation and configuration

1.First install an Ethernet network card or a wireless Network adapter such as the Gigaset PC Card 108 or the Gigaset USB Adapter 108 in the PCs you want to connect to the Gigaset SE551 WLAN dsl/cable. The installation is described in the products' user guide.

Please remember:

When installing wireless network adapters, use the default SSID for the Gigaset SE551 WLAN dsl/cable: ConnectionPoint.

2.Then make the necessary connections (PCs, modem) to the Gigaset SE551 WLAN dsl/cable and switch the device on (see section "Connecting the Gigaset SE551 WLAN dsl/cable" on page 20).

3.Before the PCs can communicate with the Gigaset SE551 WLAN dsl/cable and with each other in a local network, you have to change their network settings. Configure these network settings on one PC first so that it can establish a connection to the Gigaset SE551 WLAN dsl/cable. You can then use this PC to configure the device. To find out how to do this, read the document entitled “Network configuration” on the CD.

4.In a wireless connection you establish the link from the PC's wireless network adapt- er to the Gigaset SE551 WLAN dsl/cable. This is described in the user guide for the network adapter.

5.Then configure the Gigaset SE551 WLAN dsl/cable to activate the device's Internet access (refer to the section "Basic Setup Wizard" on page 29). This will require the access data from your Internet service provider.

uIf you want to connect more PCs to the Gigaset SE551 WLAN dsl/cable, configure their network settings so as to set up the local network (refer to the document enti- tled “Network configuration” on the CD).

uIf you want to use the Gigaset SE551 WLAN dsl/cable's other functions e.g. the com- prehensive security features, use the router's Security Setup (see page 34) or the Advanced Settings menu (see page 43).

15