Siemens SE551 PCs, and, logged-in, Click on the, Click on the, Click on the, Please remember:, Known wireless clients, Entering PCs manually:, in the appropriate fields

80

ì

ì

ì

Selecting from the list of logged-in PCs

ì From the Known wireless clients list (all PCs that currently have access to the Gigaset SE551 WLAN dsl/cable), select the PC you want to add to the access control.

ì Click on the Add button to add the entry to the list. ì Apply the settings by clicking OK.

Please remember:

If you activate MAC access control, you must at least enter the PC from which you are configuring the Gigaset SE551 WLAN dsl/cable. Otherwise you will no longer be able to access the user interface and a corresponding error message will be shown.

If, by mistake, you have denied all PCs access to the Gigaset SE551 WLAN dsl/cable you have two choices:

Click on the Add button to add the entry to the list.

Click on the Delete button to delete the entry from the list. Apply the settings by clicking OK.

Configuring the Advanced Settings

Entering PCs manually:

ì Enter the required PCs with MAC address and Device name in the appropriate fields.

uYou can completely reset the Gigaset SE551 WLAN dsl/cable (see page 18).

uYou can connect a PC to the Gigaset SE551 WLAN dsl/cable using one of the LAN connections. As MAC access control only applies to PCs that are con- nected wirelessly, you can use this PC to change the configuration.