Configuring the Advanced Settings

FTP

FTP (File Transfer Protocol) is a protocol for exchanging files on the Internet. You can use it, for example, to offer files for downloading, or to receive files from other users.

ìActivate the FTP service for your Web server.

ìYou can change the Port via which Internet users can access your data, for example, to hide your data and protect it against unauthorised users.

For your security, it is only possible to publish data on the Internet via the FTP service if this is stored in the \gigaset_ftp directory.

In addition – for example, if you wish to change your own homepage via the Internet – you can also set up FTP access in the \gigaset_http directory. You can allow this access generally or only allow it for selected users with a user name and password.

ìFor Access (read only), select whether all users may read your data in Anonymous mode, or only one Specified user.

ìSelect whether Access (full control) to your data is disabled or whether a Specified user may read, edit and delete your data.

ìEnter the name in the Specified user field. Define different user names for the dif- ferent types of access and directory.

ìEnter the password for the user and confirm it by entering it again in the field below. Please note when making the entry that the password is case sensitive. Avoid proper names and all too obvious words. Instead, use upper and lower case letters, num- bers and special characters.

ìClick on OK to apply the changes.

88