Siemens SE551 Administration and status information, u update the firmware (see page 97), Administration and status information

Administration and status information

Administration and status information

The Gigaset SE551 WLAN dsl/cable user interface includes several helpful functions for administration. You can

uopen an Internet connection manually (see below), u select regional options (see page 91),

u change the system password (see page 92), u set up remote management (see page 93),

u save, and if necessary restore, configuration data (see page 95),

u reset the Gigaset SE551 WLAN dsl/cable to the factory settings (see page 96), u reboot the device (see page 96),

u update the firmware (see page 97),u make the settings for the system protocol (see page 98),

uview information about the configuration and status of the Gigaset SE551 WLAN dsl/cable (see page 99).

Connecting to the Internet manually

You can connect to the Internet manually. If, for example, you deactivated the function Auto Connect when configuring Internet access, then Internet applications (such

as your browser or e-mail application) will not automatically open a connection when they are launched. In this case, you will have to open the connection manually when it is required and also close it again when you are finished with it.

To open or close an Internet connection manually:ìOpen the Gigaset SE551 WLAN dsl/cable start screen as described on page 24.

If you have already started the configuration environment, click on the start screen tab at the top left of the window.

If you have not yet started the configuration environment, start it now and log on.

ìClick on Connect to open a connection to the Internet.

90