Siemens SL, SP, 3 P manual Battery changing, S/Sl, Removing the battery, Inserting the battery

Models: SP

1 44
Download 44 pages 18.71 Kb
Page 17
Image 17
Manual background

Battery changing

Removing the battery

Open the battery compartment as shown in the figure.

Manual backgroundManual background Up to the first stop = the instrument is then switched off

Manual backgroundManual background Completely open = to change the battery open the battery compartment completely by applying more force

Normally the battery drops out when the battery compartment is completely open.

Should this not be the case, you can lightly tap the instrument or push the battery out with a pencil as shown in the picture.

Inserting the battery

S/SL

Important! Make sure to note the polarity of the battery!

If the battery is inserted incorrectly, the battery compartment can be closed only with considerable force. This will damage the instrument.

Closing the battery compartment

Close the battery compartment by pressing from below with your finger tip.

The instrument is switched on.

17

Page 17
Image 17
Siemens SL, SP, 3 P Battery changing, S/Sl, Removing the battery, Inserting the battery, Closing the battery compartment