Installation
3. Connect WAN Cable
Connect the DSL or Cable modem to the WAN port on the DSL/Cable Router. Use the ca- ble supplied with your DSL/Cable modem. .
4. Connect Printer Cable
Use a standard parallel printer cable to connect your printer to the Printer port on the DSL/Cable Router.
5. Power Up
•Power on the Cable or DSL modem.
•Power on the Printer.
•Connect the supplied power adapter to the DSL/Cable Router and power up the router. Use only the power adapter provided. Using a different one may cause hardware damage
6. Check the LEDs
•The Status LED should flash, then turn On. If it stays On, or flashing, there is a hardware error.
•For each active LAN (PC) connection, the LAN Link/Act LED should be ON
•The WAN LED should be ON.
•The Print Act LED should be ON.
For more information, refer to LEDs in Chapter 1.
7
