Introduction

 

2. Hold the Reset Button down while you Power On the router.

 

3. Continue holding the Reset Button until the Status (Red) LED

 

blinks TWICE.

 

4. Release the Reset Button.

 

The factory default configuration has now been restored, and

 

the Router is ready for use.

WAN port

Connect the DSL or Cable Modem here. If your modem came with

(10BaseT)

a cable, use the supplied cable. Otherwise, use a standard LAN

 

cable.

10/100BaseT

Use standard LAN cables (RJ45 connectors) to connect this port to

LAN connectors

your PCs. Both 10BaseT and 100BaseT connections can be used

 

simultaneously.

 

LAN1 can act either as a normal port, or an "Uplink" port for

 

connection to another Hub. See the "Normal/Uplink" button

 

below.

Normal/Uplink

If this button is present, it allows LAN port 1 to be used as an

Button- Optional

Uplink port for connecting directly to another hub.

 

When depressed (in), then the "LAN 1" port becomes an "Uplink"

 

port, and must be connected to a normal port on another Hub.

 

If this button is extended (out), then the "LAN 1" port acts as a

 

normal LAN port.

Power port

Connect the supplied power adapter here.

5

Page 8
Image 8
Siemens SS2604 10BaseT, 10/100BaseT, LAN connectors, LAN1 can act either as a normal port, or an Uplink port for, Below